This project describes that how to use the serial to ethernet device for different platform. The serial to ethernet is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
WIZnet Serial to Ethernet (S2E) Module provides Serial AT command and configuration tool to monitor and control the current mode of the device such as device setting, current running mode and connection status.
In order to complete this lesson, you will need an Arduino, an Ethernet Shield, and the Pressure Sensor. If you do not have this particular pressure sensor, you can probably follow along in the lesson using whatever sensor you have that is of interest.
This article is how to control the device using smartphone with Ethernet connection.
Recently WIZwiki-W7500 platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500 by changing UART definition because I can handle a source code easily. You can know the value of BLE sensor even if it is so far.