In this project we have successfully developed a prototype for the real time solution and implementation of Traffic Management System with an Autonomous car and the added feature of Ambulance Detection.
The sensor data can be sent to the IoT server using Wiz550SR, The WIZ550SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.
In this tutorial, we will design a web page that will retrieve Analog readings from the Arduino's Analog Pins and display them on a bar chart within the web page
The system consists of a low power consumption PC running Windows 7 (Dell OptiPlex FX170), an APC Rack PDU AP7940 to control the well pump, and an Arduino UNO R3 with a 3 wire 15 psi water pressure sensor and a Ethernet Shield.
In order to complete this lesson, you will need an Arduino, an Ethernet Shield, and the Pressure Sensor. If you do not have this particular pressure sensor, you can probably follow along in the lesson using whatever sensor you have that is of interest.
This is Gateway product made by WIZnet customer using WIZ107SR.
Applications, Arduino Ethernet, Automation, Cloud, Ethernet Shield, Gateway, Remote Control, Serial to Ethernet, Serial to Ethernet, W5100, W5100robert
Here’s an example using Arduino to monitor the position of a garage door, and wirelessly report the position to OpenHAB, to be displayed the web interface.