This is a Serial2Ethernt IoT device that a user can implement Serial2Ethernet easily by using WIZwiki-W7500P platform.
Please refer to the following.
1. WIZwiki-W7500P board.
2. Mini USB cable
3. LAN cable
4. UART2USB adapter
Please connect an USB, LAN cable and UART2USB adapter
You can get more HW info by the following site.
Prepare Development Environment
I prepared GCC development environment by the following site.
I installed GNU Toolchain, Java JDK, Eclipse, Cygwin.
If you install all tools, you are ready for running this project.
You can use a Configuration Tool by the following temporarily.
How to use a CFG tool :http://wizwiki.net/wiki/doku.php?id=products:wiz550s2e:wiz550s2epg_en#configuration_tool
WIZwiki-W7500P library source :http://wizwiki.net/wiki/doku.php?id=products:w7500p:library
Software : GitHub Repository
I opened source codes of this project in GitHub.
You can download this project files. And then import project into Eclipse.
After compile, you can run S2E application of WIZwiki-W7500P.
This project is open for everyone. I expect your participation to improve a quality of project.
How to Run : Test Result
Refer to the movie of Firmup operation. ( https://www.youtube.com/watch?v=a5-Lf9taNOU)
Refer to the movie of S2E operation. ( https://www.youtube.com/watch?v=9s8l1P7m2xo )
1. To program FW into a target.
2. To reset a target and insert MAC address.
3. To search a target by Configuration Tool.
4. To check Host IP and Options.
5. To change IP, Gateway properly.
6. To search a target by Configuration Tool again.
7. Carry out S2E operation.
You can see the test result by the video.
Thank you for your attention.
*Tip : If you register in www.wiznetian.com and work actively, you can get a sample cheaper than E-sales as well as a free sample.
If you want to know more in detail, refer to