Project Description

Automated Garden


This project is an example of Ethernet shield.
User can manage his garden easily by using Arduino platform through Web.
This project would be included in IoT category of WIZnet Museum.

Hardware components:

-. Arduino UNO & Genuino UNO

-. Arduino Ethernet Shield2

-. Raspberry Pi

-. Sensors

Software apps and online services:

-. Arduino IDE

-. Raspberry Pi Raspbian

-. Cayenne








Setup the Raspberry Pi

Let’s do a time lapse of the plant growing.

3 Software:

  • Putty to connect in remote to the Raspberry WIn32 disk imager:

After downloading, install it. Open it:

1. You will see “device”. In general, the default is good (if you only have the SD card connected)

2. Click on the blue icon folder and select the Raspbian Jessie image you have downloaded

3. Click write and it’s done. You can now insert the card to the Raspberry.

Putty: It allows us to connect via SSH, open Putty (no need to install).

  • Connect internet cable to the Raspberry
  • You need to find the IP of the Raspberry 2 the easy way:
  • Connect to your box interface you will be able to see the device with the IP
  • Connect the touchscreen and keyboard go to terminal then ifconfig.Now in Putty enter the IP address. It will be something like then enter.
  • It will ask to trust, click yes


If you want to know more in detail, refer to



Collected by Jim: